Quantcast
Channel: LaserJet Printing topics
Viewing all 56494 articles
Browse latest View live

Warranty Replacement on brand new HP Cyan Cartridge

$
0
0

Hello there,

 

I purchased a 3 pack of geniune HP toner cartridges from Amazon on June 22nd. They were deliverd a few days later and I installed them in my printer. I use the printer just for printing out Etsy paperwork and the occasional letterhead/business letter so I have printed perhaps 50 pages, mostly text and letterhead with very little color.

 

Tonight I went to print some simple b/w pages but when the prints come out all of the pages are completely covered in blue. It looks like the other colors are printing normally underneath the blue layer, but the cyan cartridge is leaking or spraying the entire page with cyan ink.

 

Since these are brand new, original HP cartridges that I payed HP's higher prices for (no off-brand toner for me!), and since HP explicitly warrants cartridges against defects, I would like to open a ticket and find out how to return this cyan cartridge for a replacement.

 

Please contact me at the email address listed in my profile and let me know what to do. I would be happy to return the cartridge along with my proof of purchase to get the warranty cartridge covered.

 

Needless to say, I am frustrated with the quality control of HP's "guaranteed" toner cartridges, especially given the fact that HP charges a higher price for the security of getting the cartridges straight from HP. My hope is that I can get a cartridge that works. I paid almost $300 for a set of three cartridges and it's disheartening to have one of them blow up on me.


Please help!

 

Thank you,

 

Jason Young

Austin, Tx


Re: LaserJet CP1025nw color - Attention Light on

$
0
0

I am having the same problem since installing the firmware update. I have tried resetting the machine, unplugging it, etc. Nothing has worked. Is there another firmware update or is there some way that I could set it back to how the firmware was prior to updating it?

 

Thank you!

i forgot my printer password(hp laserjet pro mfp226dn)

$
0
0

hi sir,

 

i forgot my printer password ,i want to remove that ,how can i do .please help urjently.

Printer cartridge

$
0
0

Hi,

I am using HP 1010 printer for many years ( 14 years ) and i am happy for its faithfullness. However, i have a problem with its cartridge. I CANNOT find a replacement!

 

 I have been looking for a compatible cartridge since checking with hp online store came up zilch. I appreciate your input if any one can direct me to a store that sells Q2612A/AD laserjet printer cartridge.

 

Much thanks

m175nw Error 79

$
0
0

I have the code erroe 79 and I have done the recomended switch off this did not work I have also downloaded the new firmwere this also did not work   next step ?

forgot password of laserjet pro mfp m226dn

$
0
0

Hi sir,

i forgot my printer password .i want remoe password permanently,plz help me to do this .very urjently

HP 2055 not recognised through USB

$
0
0

I would be grateful for your assistance.  I am running the Windows 10 64 bit operating system on an Asus N550JV laptop and my laptop will not recognise that my HP P2055d printer is connected when connected through a USB cable.

 

I have two HP printers, this P2055d and an MFP127fn.

 

The latter works OK also through a USB cable.  I also have a Cannon MX510 which works through the USB cable. 

The P2055d is installed on the computer, it is found by HP print and scan doctor, but when I try to access it through print and scan doctor I am told the printer is not connected.

 

Things I have tried that don't help it print:

I have installed the printer drivers both using the disk which was provided with the printer and from the HP website.

I used add devices and printers in Windows control panel, it isn't detected.  

The P2055d is set to print in offline mode

I have tried connecting the printer to other USB ports. Iin fact I have tried it in all the ports in my laptop and the P2055d isn't detected anywhere. Conversely I have use other printers in these ports and they are detected.
I changed the cable.

I have used the P2055d on other computers via the USB cable, it works OK

I have tried deleting and reinstalling the P2055d multiple time. I have also tried deleting and reinstalling the USB ports

I have run several diagnostic programs which don't detect any errors.

 

Most recently I downloaded the universal print driver 6.2.1.20636 from 2 May 2016. I managed to get this to install and communicate in some way with the printer but when I get the error message  49 ERR 3D90A44 which has been reported on these forums but I can't find a solution.

 

There seems to be a firmware update which I cannot install because the laptop doesn't detect the printer.

 

I would be grateful for some assistance

 

Thank you

 

AK373

 

 

 

 

 

 

 

Printing Issues

$
0
0

We have this printer on a simple workgroup network, connected via a network cable and switch it prints ok from all PCs from initial swich on of the printer.  After an undesignated time when you try to print again somtimes it fails and the only way to get it to print is a switch off/on of the printer then all is fine for a time then it does it again.


hp m402n

$
0
0

When i go to print out several pages,the printer says "unexpected paper size load A5 in tray 2". i have removed and reinstalled the sofware,but no luck. please help!

LaserJet M1217nfw Won't Print

$
0
0

On Friday everything worked fine.  This morning my printer won't work.  When I try to print a document nothing happens.  The document is in queque but under status it is blank (nothing there). Is this possibly a bad cable all of a sudden?  I live in a remote area (there are no computer shops close by that sell things).  I also work from home so I need a working printer.  Ideas?  Suggestions?

slow to start printing on hp printers

$
0
0

hp p1102w and hp m1217nfw printers are slow to start printing after booting up.   this usually occurs when using Word 2013.  I am using windows 10(64 bit).  it usually will evntually print, but sometimes takes several minutes.  after it has printed one document, it is usually okay on subsequent documents, but not always.  envelopes are especially slow to start printing on the first one to print. 

New FiOS Router - cannot connect wirelessly to HP 7410 printer using WEP key (too long/invalid)?

$
0
0

Ever since I got a new router I cannot print wirelessly.  Don't know if this b/c of Windows 10 or the router?!   

It says the WEP is invalid, or not the right amount of digits.  I'm not that computer literate but I've done this prior successfuly.  Please advise and thanks!

Laser jet ink cartridges

$
0
0
While going through my deceased fathers things, I came across these 3 laser jet ink cartridges. My mother no longer has the printer that these cartridges go to. Is there any way that we can return them to you for a partial refund. We of course have no receipts, and they are at least 4-6 months old. Thank you for your attention to this matter.

PRINTING CROOKED/SKEWED

$
0
0

I have a color laser jet M252dw printer and lately it has been printing most sheets all crooked. Its pretty obvious and its just wasting my paper.

 

 

anyone have a answer and how it can be solved?

printer stops printing after doing one copy

$
0
0

Whenever I print multiple copies of a custom size document, the printer has to clean after each copy before I manually hit continue to get the next copy.  How do I get the printer to print the copies continuously?


Printed font is not the same as what appears on the print preview

$
0
0

I have attempted to print several things today and with each item the font is printed as an outline withouot any fill.  The print preview looks right and I have double checked that the problem isn't with the software program.  I have printed both word documents, excel documents and off the internet.  I have had the same problem with each so I'm thinking the problem is with the printer.  Help!!

Error 99.02.20

$
0
0

Original problem was: 99.09.64 Disk Non-Functional or a 99.09.64 Disk Malfunction error.

The customer believes a power surge occurred at that time.

 

Attempts to format and update the  firmware on the SSD failed. Obtained a brand new SSD.

Replaced SSD.  Attempt to download and update firmware failed. Attempt to do a "part clean" failed. 

Now getting a 99.02.20 error.  Since this is two SSDs that aren't working, I suspect a failing formatter.

 

BTW, this is the second time in about 3-4 months the printer has incurred a SSD failure. The first time, replacing the SSD and updating the firmware worked perfectly.  

 

I would appreciate any input with simular experiences or resolutions. 

Thank you.

Cdelta88

Photo tray print, printing in blue instead of black.

$
0
0

I am trying to print a card, that fits in the photo tray nicely (it is feeding just fine, but does have a pre-fold perforation).  It is a black and white document, created in Illustrator.  Whenever I print it, it is printing very nicely and consistently, except in a shade of blue.

 

I have done many trouble shooting techniques and it ha not made a difference.

 

HP MC6040 Fuser Error 50.1

$
0
0

Printer was working normal, now I get this HP MC6040 Fuser Error 50.1 order a new fuser and I swap fuser cold reset, and nor luck the message will no go away.

I try a new power cord, outlet, removed all comsumables from the printer and nothing...

 

Any idea how can I get this message dissapear. 

 

Thank you 

infinite initilazing and yellow triangle flashing

$
0
0

I have the laser jet pro  mfp  m127 fn, that went into an infinite  initializing and a flashing yellow triangle. Please advise instructions to do a factory reset, and /or any explanation for this issue?

 

Thank you

 

Carlos

Viewing all 56494 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>