I'm trying to upload the hp laserjet professional disc 1100 to my computer so I can use my printer wirelessly, When i try to install the program it says that the administrater has blocked me from running the app. How can I fix this problem. Thanks.
↧
help
↧
Can see blue & red colors when priting black
The blue & red colors are leaving a slight offset trace on the back of the typing when priting black. Makes the document look awful and harder to read
Tks
↧
↧
HP P3015 Error 49
We have several HP P3015 printers and we manged to brick around 4 of them. Everytime we turn on the printer now, they display error 49, "please Turn off and on".
The problem started when we were performing a firmware update by copying the ljP3015fw_07.240.7.rfu to the printer which loaded it as a print queue over the network. We follow the instructions exactly on how to do it but the printer didn't like it.
The printer went offline and then physically displayed Error 49 after it boot up.
- I've tried a cold reset but that didn't do anything.
- I've tried changing the formatter board as recommended by some other posts with that from a good HP P3015 but that didn't fix it. I've tried putting the "bad" formatter board in the good printer and it works fine. So I've narrowed it down to not be the formatter board. I did the same combination with the input panel and no change in result.
- I've tried hitting the button inside the printer for printing a test page but nothing happens.
- I've tried plugging the printer in by USB cable, but it doesn't get detected by the computer
I'm out of ideas on what to do. Is there something I'm missing?
↧
Printing envelopes
HP Laser Jet P1606dn; Windows 7.
When printing standard envelops, the address is now too far to the left. This is a problem with no apparent change or cause.
Hermarsh
↧
ERROR 59.C0
what can we do when error 59.C0 appear and can't repair with just disconect/connect on wall or try to reset
↧
↧
Printing solid black blocks
Hi! Trying to print greeting cards from the Hallmark Card Studio. It printed fine on half of the card, for some reason printing solid black on other side. Prints documents just fine. Thanks!
↧
HP Laserjet P1102w won't print
I'm using an HP Laserjet P1102w and Windows 10. I'm not very tech-savvy.
Problem:
The printer won't print pdfs wirelessly nor by USB or will only print specific pages of a pdf file. Won't print from either Reader or Microsoft Edge. The document either doesn't show up in the print queue at all or appears and then disappears. Seems to print Word documents, excel spreadsheets, and image files fine.
I've tried:
- Reinstalling software using from both the CD and the HP website (will print the test page but nothing else)
- Updating Windows
- printer properties > advanced > print directly to the printer > apply (says, "Printer settings could not be saved. The specified data type is invalid")
- Opening file with Internet Explorer (asks me to open/save the file, which puts me back into Reader/Microsoft Edge)
- Troubleshooting printer using Windows toubleshooter and HP Print and Scan Doctor (said nothing was wrong)
- printer properties > ports > add port... > Standard TCP/IP Port > New Port... > [put in IP address] > OK
- Printing in Economode/draft mode
- Administrative tools > services > print spooler > restart the service
- Start > Command prompt> type "net stop spooler" > enter (says, "System error 5 has occured. Access is denied")
- Setting printer as default printer
↧
4015 envelope feeder
I used to be able to print a batch of envelopes from the envelope feeder in tray 1 without getting up, pushing the ok button and changing to the feeder.
All of a sudden, maybe after a windows update???, it's not working the same. I have to get push the ok button, change the tray with prompts and hit the ok button again - whether it's for one envelope of 70 - each time!
Any one else have the same issue?
↧
Laserjet M553 Says there is a paper jam when there isn't
We have an HP Laserjet Enterprise M553 that keeps saying there is a paper jam. It wont boot up fully it just stops at saying "Open right door and remove all paper, then close door". I have gone through it all and there is not even a tiny scrap of paper in this printer yet it keeps saying there is a jam. Any help on this woudl be greatly appreciated.
↧
↧
Color Laserjet 3800 doesn't print a color
Hi!
as in the subject I have a Clj 3800 that can't print the magenta color.
If I print the consumables state page, i have the magenta color at 96% (is almost new) but the printed line that should be red is empy (white)
Has someone an idea to solve this iussue?
Thanks to everyone
Dario
↧
HP 2550L won't print in anything but yellow unless I change it to grayscale.
HP 2550L - replaced 3 of the four cartridges. Printer will print but only anything that is yellow. Will print in black if it is just a black/white document or grayscale is selected. Drum was also replaced. I've tried re-booting - putting the old cartridges back in but they indicate that they need changing. Question - would 1 cartridge make a difference? They are all authentic HP cartridges. Before I bring this to a service center, I would really like to know if it is worth putting more money into it. Thank you for any help that you may be able to provide me.
↧
HP LaserJet P2035 (CE461A) not printing correctly from IE versions higher than 8
Please can anyone assist? I have an HP LaserJet P2035 (CE461A) that is not printing correctly from Internet Explorer versions higher than 8. It works well for all other applications and it works well in Internet Explorer 8. However, once I try any other higher version there are issues. Any help would be greatly appreciated.
↧
Two 4555s with similar problem
We have two HP M4555 printers that are getting the same error 13.C1.D2 (late to intermediate switchback sensor). These printers print normally for the majority of the time but intermittently get this jam code. One also gets the occasional 13.B9.D3 (late to fuser jam).
There doesn't appear to be an obvious cause for this problem. Fuser has been replaced as well as all of the rollers. Neither of these error codes are in the manual. Help?
↧
↧
Installing Laser Printer on Surface Pro 3
HPNo. LaserJet Pro 300 MFP color MFP M375nw (Product No. CE903A)
When I first connected the printer it registered as a USB storage unit. I have sine deleted that device. I went to the HP website to confirm that this unit is compatible with Windows 10 and started to download the recommended driver using the USB port. I followed the on screen instructions. When I plug in the USB cable I see that the printer as been recognized and the download begins. It goes to 99% and it stays there for over 3 minutes before a red X appears with the statement that the download has taken too long and that this is a fatal error. I have repeated this process 4 or 5 times including just trying to download the print driver. Please help.
↧
49 Service Error
Printer has been working fine for about 12 months. Suddenly get this 49 service error message and won't go away, despite power on/off cycling.
It was on wi-fi, but It does it on ethernet cable too.
↧
HP LaserJet won't print after shutdown and restart
Over the Xmas holidays, I turned off my LaserJet and moniter to save power. When I returned and turned them on, I could not get the LaserJet to print. I have rebooted my PC several times.
The print job shows in the print queue, the LaserJet displays the green light and "ready," but nothing happens. Also, the test print page behaves the same way (shows in queue, but doesn't print).
I have installed and run the HP Print and Scan doctor and got a message of "Print Job Stuck in Queue." I have deleted the print job and re-intiated the print job several times to no avail.
Can you help?
↧
HTTP
How can i remediate vulnerability caused by HTTP Trace method enabled on my network printer HP LaserJet 4350?
Thanks
↧
↧
New printer accepts static ip, says TCP/IP settings saved, but nothing is saved
Through the Network Setup menu I've set IP Address to "Manual" and input
ip address for printer
subnet mask
ip address for gateway.
At the end the printer says TCP/IP settings are updated.
Printing out a Network Summary page shows no data.
I've swapped the ethernet cable.
Ideas?
(Thanks in advance)
↧
How to install hp LaserJet 1010 in Windows10
Hi, after upgrading to Windows 10 our printer didn't work due to some reason. When I tried to enter it again manually in various ways hp LaserJet 1010 is not on any list of selected printers to choose from. What shall I do as the printer, even a bit old, works perfectly well for our needs privately?
Appreciate a solution on this matter.
Rgds,
Canaryman
↧
M4555 MFP is posting a 49.38.0C error and then rebooting
The M4555 printer is posting a 49.38.0C error and then it reboots. This is done about 3 or 4 time per day. The printer has the lastest firmware installed and we have changed out all the PCBs one at a time to try to and correct the issue.
↧