Quantcast
Channel: LaserJet Printing topics
Viewing all 56486 articles
Browse latest View live

Unconnectable Printer

$
0
0

Twenty one hours trying to reconnect this printer n wireless network to my HP570-p054 desktop! I have run everything and all I ever get when downloading installation software is "Unable to find printer". It is connected to a network IP address 192.168.86.155 per the wireless icon screen on the printer. What gives...I've done this 50 times and nothing. I've connected it on two different networks and per the printer it says connected. HP should have put an input on this 2 year old PC so that I could plug it in through that!


HP printer stuck on initialising

$
0
0

Hello,

 My HP laser printer 26 mw stuck during initialisng. I did try the hard reset it did not work.Please help sending info through email, thank you

George Z.

HP LaserJet CP 1025 not printing

$
0
0

I have several HP Printers, my DesignJet 111 roll had issues early this week and now is my HP Laserjet CP 1025that 

suddenly doesn't print, not even the test page… 
I tried reinstalling the software, HP Print and Scan Doctor (it appears, says it's ok, but no print test page... it appears for a moment and than vanishes without printing...), HP Smart the same... 
My Deskjet 2600 prints fine... my DesignJet 111 still to be tested (I deleted the windows upgrade KB4557957 as it seems to be a fiz for some people with the same issue).

 

Please advise, and take a look at the speck of each one... is something wrong?
Screenshot 2020-06-20 19.18.04.png

Photosmart Plus e-All-in-One Printer B210a Ink System Failure 0xc19a0003 - Reset doesn't work

$
0
0

I've tried HP's reset of the printer, numerous times and tried all the other HP reset suggestions but I still get the same thing:

'Ink System Failure 0xc19a0003'

I have brand new $70 per ink cartridges in the printer. I've tried to clean the printer heads but it says:

"An error has occurred. (devInfoPage-503)"

Please let me know what else I can do to get this fixed.

Thank you.

M283 Laser Printer Drops WiFi connection

$
0
0

My M283 Laser Printer connects to WiFi just fine, but after awhile it will not show up and I need to power cycle the printer.  My old printer never had this issue. Is there something I can do to make sure the printer is always connected to WiFi? It is in the same room as the router (but not feasible for a hardwire Ethernet connection).

Color laserjet Pro MFP M281fdw wont work with updated Mac

$
0
0

I hit print, it goes into the que, connects to the printer, says job is printing, sometimes I hear the printer spin a bit, and then BAM, the job disappears. I am so disappointed in this printer and I have a closet of new ink that I paid a fortune for..... Please help.  I have done the reset and update route and it is jsut getting worse.

 

 

Grey prints after installing new 12A cartridge

$
0
0

I installed a new 12 A toner cartridge and the printer keeps pinting grey pages with visible double texts in background. The cleaning operation of the printer did not help.

is HP ENVY 5660 compatible with MAC OS Catalina version 10.15.5?

$
0
0

recent upgrade to MAC OS Catalina


HP LaserJet Pro MFP M182nw color is not even close to the original

$
0
0

When printing color images the print is saturated with red.  What I print does not resemble the original in color.  It is sooo far off.  Yellow is orange - blue is teal - white is pink, etc.  I have calibrated as instructed on the HP site, but it did not change anything.  It is awful.  I can't find any help on HP's website, and there doesn't seem to be any troubleshooting desk to call.  Please help, or I will have to return the printer.

Looking For HP_Universal_Print_Driver_pcl5

$
0
0

it seems the official website no longer has the HP_Universal_Print_Driver_pcl5, pcl6 is not working for me,  it shows the error 'Unsupported Personality PCLXL"..where can I get the pcl5?

Need assistance to know the compatible HP Toner cartridge for HP LaserJet Pro MFP M226dw.

$
0
0

When I open the Printer, I see the HP Laser Jet Print  Cartridge mentioned as 88A, CC388A.

PAPER JAM.ENTIRE TRAY FULL PAPER GONE IN M1136 MFP

$
0
0

Entire paper in the tray gone in and jammed

Will HP printer 7720 print in black with depleted colour cartidges

$
0
0

As above. The printer stopped printing as the colour cartridges are empty but the black still has ink left in it. Can I get it to print in black only without having to buy replacement cartridges? Strange that all the colour cartridges bece low at the same time. Funny that. 

Apple Programs and HP Media Types

$
0
0

I have an HP MFP M177fw LaserJet Pro printer.  When printing from my iMac the "media types" that Apple programs show do not match what the HP printer offers.

Matter of fact in the HP set up screen on the "web" Paper Setup allows me to choose from the full line of HP Paper Products.  However under "Paper Types" in the set up the selections are only a few listed types rather than the same full line of HP Paper Products.

As I said, my Apple programs list different general paper types. use a work around by setting up a 3 tiered cross reference table.  Luckily I only print using "light" paper for most things, HP Glossy Brochure Paper for pictures and card stock for my golf league scorecards.   My HP printer is 6 1/2 years old but still going strong.  This problem is not really major.  Even when the printer and computer were both new the problem was there and I worked around it.

The other problem I have is that the HP wifi antennae can't receive a good signal from my new AT&T router.  Too many walls.  No problem because I just plugged the printer in using an ethernet cable directly to the iMac.  Works fine.  I can also print from my iPad or iPhone by selecting the printer wifi.

Rant Over.

Printer cannot be set as default - stays on Fax

$
0
0

Where do I look for the Operating System

 


HP Officejet 4650. Installed 63XL ink cartridges - error message says incompatible!

$
0
0

I replaced the regular 53 ink with 63 XL ink. Package clearly says OFFICE JET 4650.  Now getting error message the brand new cartridges are incompatible with this machine. What can I do to fix it

Color Laser Jet Pro - How to Print B & W or Color as needed

$
0
0

Hi I don't want to use up all my colored ink on this printer and don't need color all the time.  In the past with other printers I had a choice from the print dialogue box - but I dont see any options provided there to print gray scale. Should I reset my presets, have not installed all the software. 

New set up put paper in says there is a jam, cannot secure paper in tray no jam?????

$
0
0

I am trying to do a new set up on a HP Office Pro 8030. I put the paper into the paper tray but no test page printed. It says there is a paper jam or tray is not in correctly. I am using 8.5x11 paper and I cannot figure out how to secure the paper, it keeps sliding in the tray the side brackets will not keep it in place.

I cannot complete the set up, I cannot get the printer claim code for HP Smart without printing and I cannot  skip the step.

 

PLEASE HELP ME.....

Officejet won't print or copy in color

$
0
0

My Officejet 8710 won't print anything in color. It prints everything in black ink. There are no error messages.

 

I've replaced the firmware and also the driver using the easy start app. I deleted the printer and reinstalled it from the system preferences list. Nothing works. I also tried copying in color and it does the same thing - prints in black even though I selected color copying. I've checked the ink levels and they're all fine. The Wifi also doesn't work, so this is all done using a USB connection.

 

I wonder if this is a proprietary issue because I didn't want to pay the ransom HP wants for name brand cartridges. It's been awhile since I've used the printer, so I can't remember if I was ever able to print color using these cartridges, but I know it worked when I had the instant ink program

HP P1102w wont allow me to install software

$
0
0

I cant setup this printer.

 

Error is:

SISetup.exe

"This app has been blocked for your protection". When looking at the digital signature of sisetup.exe I see "a certificate was explicitly revoked by its issuer." 

 

I've seen other solutions and do not have an "unblock option" in the properties of the setup file folder that is provided. I cannot seem to get this printer to work on any computer and cannot change anything in the folder that includes the installation applications. I am the admin on all my devices and have no secondary accounts and full permission.

Viewing all 56486 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>