Quantcast
Channel: LaserJet Printing topics
Viewing all 56395 articles
Browse latest View live
↧

HP laserjet 200 color MFP M276nw color misalignment, blurry prints- Calibration doesn't work

March 31, 2020, 4:45 pm
$
0
0

Prints comes out blurry. I've replaced the toner with new HP toner. 

I have followed the print quality troubleshooting steps indicating to do a color calibration.

I have done the color calibration 10 times and still my issue has not been resolved.

I also removed the power and waited 30 seconds to restart it and try printing again.

Still my issue has not been resolved. I've unplugged it for a minute and plugged it back it in and I've done a factory reset. 

 

Can any expert support me to resolve my issue?

 

 

 

 

 

 

 

↧
Search

Printer won't recognize my wifi password

March 31, 2020, 6:50 pm
$
0
0

I just bought a new LaserJet printer and keep getting an error message indicating that my wifi password is incorrect.  I currently have 3 other devices connected to my network using the same password so I don't think I am inputting it incorrectly (and I have tried it about 15 times, unsuccessfully).  I tried connecting the cable to my laptop directly and was able to get it to print (Word documents only, no PDF's for some reason).  Any ideas what my problem might be?  In reading several articles about others who have had similar problems, I noticed that my router currently has WEP security.  Could that be the problem?

 

Thanks!

↧
↧

Printer

March 31, 2020, 6:54 pm
$
0
0

I have a error message saying there is a problem with the printer or ink system. Turn printer off then on. If problem persists contact HP. I already contacted HP virtual assistant and it said to check the ink cartridges and reset the printer. I did both and nothing helped. Is there something else that can be done.  

↧

Need to factory reset the HP laserjet pro 200 color MFP M276 - cannot remember password

April 1, 2020, 12:54 am
$
0
0

Hello, I do not remember my admin password, and I need to factory reset it to make a clean start. Can anyone please help?

↧

Laserjet m15a

April 1, 2020, 1:30 am
$
0
0

Good morning to all.

I've just buy the printer. I try to install with my android phone. I see the wifi network made by the printer. I complete the installaition but now I can't see the printer at all. I think the best way it's a restore to factory reset. But all the info I found, tell to press 'wifi button'  but the printer has NO wifi button. 

The printer run perfectly with usb cable on windows pc. But I need wifi connecion.

some one can help me?

thanks

danilo

↧
↧

HOW WILL CATALINA OS OF MAC CAN BECOME COMPATIBLE WITH HP LASER 1018 PRINTER?

April 1, 2020, 1:32 am
$
0
0

I WILL UPGRADE TO CATALINA. HOW WILL MY HP LASER 1018 BECOME COMPATIBLE? 

↧

Not Able to change tray on Hp MFP277dw with android 9

April 1, 2020, 1:50 am
$
0
0

HI, I am using HP MFP 277DW printer. but whenever I give print command from My Mobile it goes to Tray-1 and if i click drop down in printer setting there is nothing given so every time I have to Load paper Manually in tray-1. I have downloaded Hp service Plugin and Hp smart print app also. I checked setting in both this application. under paper setting, there is nothing like default tray. I have checked previous answers by HP community expert and already tried everything. Please help me as nowadays I have to print many papers from Mobile or Kids Tablet because of COVID-19.

↧

Who is your shipper of printers ?

April 1, 2020, 2:09 am
$
0
0

Greetings Ladies and Gentlemen, Who is you shipper of printers ? Thank you.

↧
Search

After upgrading from windows 7 to windows 10 the printer no longer performs duplex printing

April 1, 2020, 3:31 am
$
0
0

After upgrading from windows 7 to windows 10 the printer no longer performs duplex printing

↧
↧

New Part Required - rear door Laserjet Pro 200

April 1, 2020, 4:23 am
$
0
0

Hi all, getting the dreaded "Rear Door Open" messaage on my Laserjet Pro 200 m275nw and found that the pin on the white nylon latch has finally snapped and disappeared. I need to buy a new part but cannot find anyhwere that sells them, has anybody got any ideas?

 

I'd prefer to keep it in the UK as costs will be an issue, but accept I might have to shop overseas. Tried looking on Google but that's about as much use as an ashtray on a motorbike! Photo attached to show the part, can't even find a part number...

 

part.jpg

↧

"Error " message when trying to print - HP Color LaserJet Pro MFP M277dw

April 1, 2020, 4:40 am
$
0
0

I have had this printer for several years and suddenly a problem appeared a few weeks ago (no change to PC; no change to Wi Fi; no change to Printer).

When I print, after a few minutes I see a message "error printing" and the job does not get printed.

I need to switch off and then ON again the printer for it to print.

 

It is becoming a bot annoying and I have no clue where the problem can be.

I ran HP Print Dr and all is well!!

HP Diagnostics indicates NO update available.

 

Any suggestion? Anyone with the same problem?

Thanks

↧

My old printer broke and i retrieved my daughters HP 6600 that had never been used but doesn't work

April 1, 2020, 4:44 am
$
0
0

I have a HP 6600 that has never been used and was sat upstairs in storage, however it won't print and has the messages

1)  ink system failure

2)  printhead missing or failed

 

i have replaced the ink cartridges with no changes what can i do?

↧

Driver?

April 1, 2020, 4:55 am
↧
↧

Error triangle as soon as laser MFP m255 is turned on)

April 1, 2020, 5:42 am
↧

HP CP5225dn printer blurry/ghosting prints

April 1, 2020, 7:37 am
$
0
0

Our HP CP 5225dn printer is printing blurry/ghosting documents. We have changed toners, swapped the belt and transfer roller, fuser. It was printing fine last week and decided to do this. Any suggestions?

↧
Search

Is it possible to print a PCL 6 document on a PCLms capable printer?

April 1, 2020, 6:09 am
$
0
0

Hello

We have software that only prints in the PCL 6 format.  I have 2 printers here, a LasterJet Pro MFP M130FN and an HP LaserJet P1006.  I have been doing some reading.  Is it possible to use the HP UPD (universal printer driver) to convert the documents to a format compatible with either of my two printers?

 

Thanks

 

↧

envy 7855 printer printing on it's own

April 1, 2020, 7:42 am
$
0
0

On my new HP Envy 7855 All in One printer, it is randomly printing pages with the following message:

GET / HTTP/1.1

Host: 192.168.1.8:9100

User-Agent: curl/7.59.0

Accept: */*

↧
↧

Hp laserjet MFP E62555 will not fax from desktop when you add a cover page.

April 1, 2020, 7:50 am
$
0
0

Hp laser jet MFP E62555 will not fax from desktop when you add a cover page.

↧

My HP Photosmart 6520 e-ALL-IN-ONE SERIES printer is not printing consistently and terrible. New ink

April 1, 2020, 7:50 am
$
0
0

I have not used this printer in years. It is NOT under warranty. I bought new ink (564 like it calls for), installed it correctly. No error messages on the screen. When I send print jobs, sometimes it barely prints (and in a crappy grey color). I have all color and 1 black cartridges. No color prints. I've done all the diagnostics the Virtual agent suggests. All updates are current (including Firmware). I'm at a loss of what to do, but I have a feeling it is not the ink that is the problem. Any suggestions are appreciated on what to do next, as I have not been able to get a human on the phone to help me.

↧

New router/modem (ISP), can't connect to old network. How to connect LaserJet Pro MFP277dw wireles?

April 1, 2020, 7:55 am
$
0
0

I changed ISP from Cable broadband to ATT.  I am trying to connect my HP Color LaserJet Pro MFP M277dw printer to new network.  The printer is asking for the old network password (can't connect to) and says invalid password.  How do I reset printer or remove old network (wireless?)

↧
Viewing all 56395 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>