instilaising complaint
sceen only instilaing
↧
hp 1005 service
↧
After updating of firmware the HP m15w is not defined by the computer
Hello! I have a printer HP m15w. Earlier has firmware - (20180809). Yestarday I updated the printer's firmware to latest version (20190725, release Sep 25, 2019). The update succesfully finished. After the printer is not defined by computer (Windows 7 x64). When I switch on the printer firstly flashing exclamation mark one second and flashing power button always. I plug in to pc with original usb cable, I preinstalled original driver, but printer is not defined. How can I restore to previous version of firmware or restore to factory firmware. Please help me!
Driver and firmware page:
https://www.support.hp.com/us-en/drivers/selfservice/hp-laserjet-pro-m14-m17-printer-series/16647043...
Sorry for my English...
↧
↧
How do i wirelessly sync my PC with HP DESKJET using a dongle?
NIL
↧
Printer in Error State
Hi,
Anytime I try to print anything from my Surface the system tells me it is in an error state.
The printer software says the printer is ready.
I have re-installed the drivers etc and the unit will scan and I can also print directly from my phone but cannot get anything to print from the Surface.
Any assistance would be greatly appreciated.
Best regards
Darren
↧
print cartridge cf230x date
Print cartridge CF230X.
On the small side of the box one can read 8L25h2Aa and 20181225. Is that a production date or a peremtion (valid untill) date?
↧
↧
print streaks
Printed streaks
↧
HP LaserJet MFP M426fdn PCL XL ERROR
My HP Printer model is HP LaserJet MFP M426fdn.
Sometimes when user send a print through network following massage printing on the paper continuously. after resetting to printer defaults also not fixing this error and coming prints continuously.
"PCL XL ERROR
Subsystem:GE
Error: Internal Error 0x89
File Name: Jet Ready Image.c
Line Number:831
Its appreciate that someone can give a solution. Thank You.
↧
trying to disable "tray 1" in order to use tray 2. My "tray 1" does not have the little feeder arms
I can't figure out how to completely disable tray 1. I have been trying to locate my Ip address for my printer so I can go in and change preferences but when I got to the command and ping printername, it doesn't work. When I go into the printer settings to print the configuration page, it only wants to print from the tray 1- I can't get it to recognize paper in tray 1 so I can't use it because it doesn't have the little adjustable arms. I can't run a cleaning page through because it only wants to use tray 1, I have tried everything I know to do in order to use tray 2 instead.
↧
10.1000 Supply Memory Error
Getting 10.1000 Supply Memory Error with any toner cartridge that is installed. Please advise.
Thank you,
↧
↧
Laserjet P1102w sluggish lately
The last couple of months, my printer has been acting very sluggish. It used to print multiple copies of one-page documents very fast; now it treats each copy as a separate print job and takes several seconds to send one page out (instead of sending them out repeatedly, one after the other). Also, I find that the printer will simply fail to respond often, forcing me to go into Windows Printer controls and delete the print job. Sometimes even that doesn't work, and I simply have to shut down the printer and then restart it.
I've only had this printer 4-5 years, and for HPs that means there should be a lot of life left. Is there a windows update that deals with this? I have already downloaded new drivers, but I remember the installation and configuring of this printer was such a hassle I'd hate to have to start all over again--so I'm hoping there is something else other than installing new drivers.
↧
No color and gaps in printing
Hello,
My printer does not print color even on the Print Quality Diagnostics page and there are gaps in the text when it prints in black and while (see attached).
I have cleaned the the cartridges and the ink levels show about 2/3 full. The printer does not make any unusual noises and scanning works (the attached image was scanned), but copying a document results in a low quality output with faint color, gaps, and smears.
I appreciate any assistance that anyone can provide.
-Chris
↧
WPS PIN Retrieval
Having major issues getting an old HP Elitebook to discover my HP P1102w printer. When I plug the printer in via USB it gives me a strange message about CD DRIVE (E): HP Smart Install but I no longer have a CD for the printer. I've tried downloading drivers but with no success and am now struggling trying to connect the devices wirelessly as I'm prompted for a WPS PIN i don't have. There's no LED screen on the printer, (it's very basic) so I'm wondering whether I can retrieve the PIN using the device serial number.
Any advice would be much appreciated!
Thanks.
↧
LaserJet M1522nf powers up by display is dark and it does not print.
This morning I noticed that the display on my M1522 was lit, but it just showed the name HewlettPackard vs. the normal display. I turned off the printer then back on and it went through the motion like it was starting up and when it stopped 'humming' the display remained dark. I tried printing a document, but nothing happened. I tried photocopying a document and nothing.
I unplugged the printer at both ends, disconnected it from my laptop waited for approx 2 min, then plugged everything back in, but it went through the same cycle as before and nothing.
↧
↧
Error message unexpected configuration problem Ox80020101
Just installed a new printer and it is very slow to begin printing, the last page of a report may not print for several minutes and I got a configuration error (above) when someone sent a jpg file
↧
HP LaserJet M605 not recognizing JetDirect
After performing a firmware update, the printer no longer recognizes the JetDirect card.
We tired flashing via USB twice, and a third time, rolled back the update.
Any suggestions? We have 4 that are now offline the rest of the HP's of various models updated just fine.
↧
LaserJet can take 5 minutes to start printing. Now Job shows in print dialog box then disappears.
For a month or more my LaserJet Pro will sometimes take 5 or 10 minutes before it prints the job. Larger files seem to be delayed longer. Now the print job will show in the print que for several minutes then will disappear. Recently the printer screen will occasionally say, "File Corrupted." Unplugging does not help.
↧
Resetting Administrator Password on M225dw
Hello - what was the steps to reset the password on the M225dw? I am unable to connect to it. Thanks.
↧
↧
Unwanted fancy board suddenly appearing on left side of all printed pages
I have had my Officejet for years and have used it with no problems. Suddenly I am getting a black & gold border along the left side of all printed pages that I did not put there. It's quite pretty in design but I don't want it there. No idea where it came from but it appeared after I printed some purchased tickets to a show. How do I get it off?
Thanks
↧
HP Color LaserJet Pro M254dw issues connection and it is not recognising wireless set up?
Hello folks, I'm new here.. I've just purchased the above inkjet printer as a upgrade to my old P series black and white laser jet. I'm having issues around connecting my printer as it recognises it exists, but the setup fails. It also doesn't recognise a wireless network so can't do AirPrint as I have an iPad and MacBook. Is this a common issue, and will it get fixed with the new Mac OS update called Catalina that is out in the coming week or so properly with proper updates as there are bugs. Thanks guys
↧
4630 series printer
getting an error code on my printer oxb0654852 and then it shuts off, showing offline in windows
↧