Can You Feed 11x17 Paper for printing through the MANUAL tray?
↧
ProXpress M3870FW - 11x17
↧
I do not remember my admin username and password to edit scan to email in my Laserjet pro 200 color
↧
↧
NVRAM Reset on HP Color LaserJet MFP M475dw
I'm having an issue
my printer is stuck on initializing
please send NVRAM reset
Model: Color LaserJet MFP M475dw
Thanks
↧
NVRAM Reset on HP LaserJet Pro MFP M225dw
Hi, could you please send me step by step How to reset VNRAM of HP Laserjet Pro MFP M225dw.
I forgot the system password and can not do everything.
Thanks.
↧
False paper jam messages MFP M177 printer
I am receiving false paper jam messages. I have tried all of the on-line fixes. I saw a message that said to make a copy and that fixed it for a week. It seems likely that one of my sensors is dusty and needs cleaning but I don't know how to identify which sensor is causing the message.
↧
↧
MFP M130fn password reset needed
The control panel ask for password to access submenu and I dont remenber it.
Please help.
↧
Copies or Print outs in color have double edges in red
HP LaserJet Pro CM1415 Color Multifunction Printer: Copies or Print outs in color have double edges in red
↧
printer problem
i not able tom give print its showing error cartiage is missing or front cover is open.\
my number is 8788030421.
serial number is CNChc9876.
please helpme
↧
Hp8600 new black cartridge wont fit
Hi bought new 950 cartridge for black ink & 951 xl for colour. Whilst no problems inserting colour cartridges the black wont physically fit ....help please
printer is hp 8600 laser jet pro
↧
↧
Hp 8600 cartridge problem
Hi bought new 950 cartridge for black ink & 951 xl for colour. Whilst no problems inserting colour cartridges the black wont physically fit ....help please
printer is hp 8600 laser jet pro
↧
bad printing on hp m603 (The toner does not stick to paper)
hello to all
First, I apologize for my English I use translator
when I'm printing this printer the toner does not stick to the paper And the toner run is on the paper
The repair work could not understand the problem
I think I'm not getting hot enough
Please help me find out where the problem is
↧
HP LASERR JET 1005 PRINTER SCANNER AND PRINTING PROBLEM
Dear Sir,
I purchase the HP Laser Jet 1005 (S.No CNKNL4D33H) All in one prineter somthing 8 to 9 month before. But Printing Scanning problem is very poor and printing is dusted. So i requested to inform the printer is clearly change or reapired.
Thank you sir,
Neeraj Gupta
DAV Market , Kotla Chungi, Firozabad
9719101816, 8534032620
↧
HP Color LaserJet M254nw on Mac - "Printer is not connected"
- Model: HP Color LaserJet M254nw
- Driver Version: 2.0 (should I instal a different driver, can this be the cause of the problem?)
- Connection Type: Bonjour (is this the correct connection type ?)
- Address Type: IPv4, or IPv6, or Bonjour? which one to choose if I add device manually?
- FW Version: 2019-02-18
- MacOS 10.14 Mojave
- Wireless Network Test Report; diagnostics summary "Pass", only states Signal Strength is Very Very Low.
- HP Utility installed: "unable to communicate with the selected device"
I'm able to print from a Windows laptop, but not from the Mac. How can I solve/resolve the connection issue?
↧
↧
Laser Jet M203 Duplex Printing
HP LaserJet M203 auto duplex. Can it be turned off?
↧
Fix - R7800 DHCP Lease Expiry / HP LaserJet 400 - Printer Offline / Dropping Network Connectivity
Hi Everyone,
Found a fix for my HP LaserJet 400 printer (wired ethernet) repeatedly dropping offline every few hours, after establishing an IP address on the R7800 Nighthawk router. Having dropped offline you could not print from any networked computer.
All other standard Hewlett Packard printer connectivity troubleshooting techniques had been tried and this turned out to be the underlying issue after four days of diagnosis.
Problem Solution
Extend the DHCP & fixed IP address lease times from the standard 24 hours to 7 days (or longer).
There is no built-in GUI (Graphical User Interface) with Netgear routers to do this, much as it has been requested by other community members in the past, so you have to use Telnet backend to update the router settings.
All credit for this solution provided here goes to Andy & jlewter (thank you both so very much). There are a lot of "Do so at your own risk" provisos given in the message thread that I advise you to read very carefully but on a small home or home office network with just a few devices connecting extending the time should not be a big issue.
Windows 10 by default has Telnet turned off so you have to enable it. A good how to is shown here.
Excerpt from solution thread:
This is an extract from an archived thread, posted by ‘jlewter’ about five years ago. I’m not sure if the change is persistent through a
router power cycle / reboot, and I’m not entirely sure if it can be applied to all routers (in the case below it was a WNDR3700). "do at your own risk. telnetenable log into router # cd bin # config backup /tmp/configbackup.bin (use a usb stick to copy it off) # config set lan_lease=604800 (this is 7 days, 60*60*24*7 in seconds) # config commit Notes here.. *Tinkering with these values are done at your own risk. *Rebooting will NOT reset this value. *Editing the LAN / DHCP page in the router will NOT reset this value. *If you have a lot of different devices coming on and going off then this could slow the router down. *If you ever change your lease time DOWNWARDS then you need to reboot ALL devices on the network because the lease will EXPIRE on DHCP server and not the client. *3 - 7 days is the ideal lease time. Setting it for a few mins will be deadly to the router ;P. Setting it for 3 years (nearly) will just be silly. *Tinkering with these values are done at your own risk. Side Notes here.. *Settings are exported as plain text (this might be useful for other things).. *If you dont know how to copy files from the prompt then the command is "cp" and the usb drives are usually mounted under mnt1 or mnt/mnt1 (not gonna check it's late) *Dont try to enable local DNS caching by changing the values, I did, It still doesnt work.. *Tinkdering with these values are done at your own risk. "
Problem Definition
After power resetting, the HP LaserJet 400 M401dne (wired ethernet printer to router) would appear within the R7800 router Attached Devices table with a valid IP address, then after several hours (it varied) drop off the Attached Devices list. After dropping off the list you could no longer connect to the printer via the network, to wake it up and print, with the printer being reported as being offline.
At that point only a full power off (uplug/replug - 30 sec) reset would allow the printer to re-establish a new IP address with the router.
Bringing the printer out of sleep mode by pressing the printer power button, did nothing to re-establish a new IP address. On the printer setup, the power off never setting was turned on, so the printer never fully powers itself off. You can not turn the sleep mode option off with this model only select how long before it goes to sleep but it does have a wake on LAN feature.
Router Setup
As recommended in the HP Community forums the the printer was setup with a fixed IP address (printer control panel) and outside the DHCP LAN range setup on the router. You can use whichever DHCP range you wish and whichever fixed IP address works for you, this is just my setup.
LAN Setup
LAN TCP/IP Setup
IP Address: 192.168.1.1
IP Subnet Mask: 255.255.255.0
Use Router as DHCP Server
Starting IP Address: 192.168.1.11
Ending IP Address: 192.168.1.254
Address Reservation
Printer IP Address: 192.168.1.10
Printer Device Name: LASERJET400 (device name setup in printer control panel)
Printer MAC Address: xxxxxxxxxxx (MAC address of the device)
In theory with a fixed IP address outside of the DHCP address range set on the printer itself (not within the router), you don't need to do the DHCP address reservation but it just made things clearer and reminded me on returning to the LAN Setup screen what was going on. The address reservation doesn't cause a problem as 192.168.1.10 is never used by DHCP anyway.
This is just a visual reminder and not necessary as part of the solutoin.
Troubleshooting
Working through the very helpful troubleshooting tips in the Hewlett Packard printer forums didn't fix the issue. Tried the HP Print & Scan Doctor utility and the more modern Windows 10 HP Smart application using all their diagnostic features to check and fix connectivity and port issues.
Background
Then as a last resort I tried extending the DHCP lease times via telnet, since the R7800 router lacks a graphical interface to extend lease times. After extending the IP lease times to 7 days, the printer no longer drops off the network, even after the printer drops into sleep mode (power off never setting is set) and the wake on LAN successfully wakes up the printer.
Note: If I have to reboot my printer after 7 days that is a fine compromise, I can always extend the IP address leases to a longer time like a month if becomes an annoying problem.
The issue appears to be once the printer has dropped into sleep mode it can no longer renegotiate the IP address lease with the router so then the router drops the device after a few hours from the Attached Devices table.
In theory, the IP lease times (don't know for sure) with Netgear routers are set to 24 hours before expiring.
Half way through the set time (12 hours) the device will attempt to renegotiate the lease with the router.
If the device's network card is not online and responsive (printer sleep mode) then the lease is dropped. Once dropped no comptuer on the network with the printer driver installed can communicate with the printer as the IP address is no longer in the routing table. The address doesn't exist so the print job cannot be delivered, making the local computer's printer driver report the printer as being offline.
Hope this background and solution helps someone frustrated in the same situation.
Aly
↧
Paper tray
The paper tray will not come out or go all the way in. It seems to be off track on the right side and I can not see a way to get it back on.
↧
Re: HP LaserJet M14-M17 : Wireless not connecting anymore and cannot connect via DirectWiFi either
I'm having same issue. Wifi set up was fine - on iMac/Mojave. I just want a quick solution here. I have a solid blue wifi light - prints fine on USB but I can't understand why it's not automatically connecting to wifi? Shouldn't it just be automatic if the initial wifi set up was successful? I switch my printer off when not in use. Thanks.
↧
↧
Upgrade to windows 10, lost two printer trays
I have a 6 tray hp 4700 laser printer.
Since upgrading to windows 10, the universal printer driver under printer properties only lists 4 trays
can't find a way to change that
↧
Iron oxide
Hi there!
I must replace my 11 years old printer wich is ho laserjet p1006 by a new one. My issue is it the cartridge must content the same (or more) amount of iron oxyde in it because I use it to print my own ceramic decals and the print must melt at 1060 celcius degrees. As you see it is a bit specific and also an urgent asking (deadlines, mehh...) .
Does anybody know the amount of iron oxyde in cartridge and affordable laserjet printers? Max 200$?
Thank you very much!
↧
Connection
Trouble connecting to PC for initial connection. As soon as printer plugged in, permanent red alert button lit.
↧