printer won't print black
↧
printer wont print black
↧
Is the ADF scan resolution still limited to just 300dpi on HP MFPs?
I wanted to follow-up on the locked thread at the link below, which discusses that while the HP MFP M477fdw supports up to 1200 dpi flatbed scans, scanning from the automatic document feeder (ADF) is limited to just 300dpi. This is despite supporting duplex copying at 600dpi, so one would think that scans should be capable of at least 600dpi from the ADF:
I was strongly considering this device, but the 300dpi scan limitation from the ADF could be a deal breaker. I hope that the above thread is out-of-date and that there has been a firmware or software update which allows the user to choose a higher ADF scan resolution.
↧
↧
alignment failure
Cartridge aligment fails repeatedly after replacing black and yellow cartridges with new HP cartridges.
↧
my MFP M177fw is stuck on Initializing mode
touch pad stays on Initializing screen
↧
LaserJet 200 Color MFP M276 wiil not connect to the wireless network
I recently changed my internet service to a business connection.
Now my printer will not connect to the new router via wireless.
I continually get the error "Invalid WPA Passphrase" with two options to "Continue anyway" ir "Restore Settings."
I have verified the password, authentification type, and encryption and they all match perfectly.
I just updated the firmware by connecting the printer via Ethernet cable to my network and am still getting the message.
Help!
↧
↧
printer in error mode
The printer continues to says it is error mode when printing wirelessly. It will print via USB from MAc.
↧
Smudges on right edge of paper
Getting smuges along right hand side of the printed paper. Went to Service and Cleaning page and still has smudges.
Pulled out the Black 410X laser cartrige and viewed drum, smudges are on the right hand about half inch wide, anyway to clean?
↧
Printing single sheets on HP402dw, How to...
I want to feed the printer single sheets from the front of the printer. The online user manual shows the printer tray 1 as folding down to the horizonital positioin. But, the 402 printer only folds down to about 45 degrees.
Even if a single sheet depresses the black sensing finger towerd the center of the tray's input, the printer always pulls paper from tray 2.
Envelopes print just fine...
What to do?
↧
Error Code OXB800AD86
I went to turn on the printer and received the following error code.. OXB800AD86 How do I Fix this?
↧
↧
How to change paper type using MacBook pro
How do I change the paper type. I'm printing on card stock and the toner rubs off the stock. It doesn't do that on plain paper. The card stock is 67 lb weight and 110 lb weight.
↧
lj Pro M426fdn not printing from notepad or some fonts
I have just purchasexd and installed the printer. It is on a network with two computers. On the first machine I installed it to it will print but not all fonts and not from some programs, Notepad for instance. When I try to print from notepad I get a parameter incorrect message, the printer cycles but nothing prints. If I print from Libre Office it all works unless I am trying to print a document with an Ariel font. For instance load a document with Ariel font, printing fails. Change the font to something else and it will print fine. No other changes than the font. From devices and printers if I select the M426 and try to print a test page I get the parameter incorrect message with no print.
On the second machine everything works just fine. I took the document with Ariel font to the second machine and it printed no problems. Printing a test page works fine. Printing from Notepad works fine.
On the first machine I have followed every suggestion I could find. I removed the printer, uninstalled all HP software and cleaned up the appropriate folders. I then reinstalled the latest version of the full package. HP_LJ_Pro_MFP_M426f-M427f-PCL6_v3_Modern_Full_Solution_18002.exe Nothing changes! I am going nuts!
Can someone give me a pointer? I am going to try uninstalling again using Revo uninstaller to see if it makes a differenced.
Thanks in advance,
Bob
↧
Too dark print on color laserjet M281fdw
I have the same issue that the printer is printing too dark straight from the box and nothing has worked. I made the copy like you suggested, and it looks fine. What would be the next thing to try then? Thanks in advance.
↧
Networking Disabled
We have recently purchased the HP Pagewide Pro MFP 577DW. While configuration in EWS i have unknowingly Disbaled the Networking settings in Adminstrator settings. Now we couldnt connect the printer by any means in network. EWS is also not working. Please help to resolve.
↧
↧
Printer is frequently Stuck and need to be restarted
We are using Hp colorLaserjet CP5225 as a network shared printer. Now we are having a problem , that is the printer is haging frequently, and need to be restarted for next print.
When we try to take a print, that time the printer is showing offline and cannot accesible, when we checking the printer device, it showing stucked, then we will restart the printer to get normal stage and then the printing is possible. But after some time the printer again showing stucked....!! Our office is having only this color printer so this problem is making very difficult situation..... Please help me...!
↧
HP M277dw has stopped picking up paper when printing
Difficulty now fixed - see my post below this original one:
Printer has just stopped printing. It attempts to pick up sheet to print but fails, then shows "insert paper" error message. Tried 2 different paper reams (different makers, one old (unopened), the other newly-bought. Neither works.
Any suggested solutions?
Note: this is not connected (as far as I can work out) to the wireless connectivity problem I sought advice on last week.
↧
Printer that supports Linux 6.0 version
I want to purchase a new printer which support OS Red Hat Linux 6.0 Support please let me know
↧
my printer`s print quality has been degraded and the darkness is also reduced its too light
I TRIED INCREASING THE PRINT QUALITY OR DENSITY BUT THEN TOO THE DARKNESS IS NOT UPTO THE MARK HOW I CAN I INCREASE THE DARKNESS
↧
↧
image printing problem
Hello, I have problems printing images.. When I send and document to the printer (5225dn) a small part of the image is printed like %5 of it and the rest is blank.. Why does this happen?
Below there are some photos of the prints.
Thanks..
↧
issue with paper jam on HP laserjet m680z
I am stuck on a paper jam situation. On my Hp laserjet m680 with the 3-bin stapling mailbox accessory. I keep getting jams and i clear them without avail. It tells me to clear it under the top cover. I do but its also on side and in fuser. I clear it. But it comes back. I see the paper make it to the 3-bin stapling mailbox and stop. I don't see any blocks their.
Any suggestions to fix it.
↧
scan to email - smtpgateway is not reponding
we have leserjet M4345 printer that had a paper jam, and the guy came to sort the issue but he restarted the printer so now we can print but we cant scan to email, the message that comes says " smtp gateway is not responding" we tried to put the IP adress that was provided by our service provider but it only worked few hours now its refuses to use that IP adress again.
We just want to find out on what to do. we using IP adress for WIFI
↧