Quantcast
Channel: LaserJet Printing topics
Viewing all 56366 articles
Browse latest View live
↧

Supply 10.0000 SUPPLY MEMORY ERROR on HP M402n printer

April 16, 2018, 10:37 am
$
0
0

When inserting a cartridge into this M402n printer, you get a Supply 10.0000 SUPPLY MEMORY ERROR.  I know the cartridge is good because I have tested the same cartridge on another M402 and it does NOT display the error with the same cartridge.  I have tried 4 different cartridges with this printer all giving the same error.  It is out of warranty, but I am pretty handy (Desktop Tech) and I have changed the fuser sleeeve on one of these before successfully.  I am not finding much info on one of these on the web to fix an issue with the toner sensor on this printer.  Any suggestions?  Could it be the toner sensor in the printer is bad and needs to be replaced? Any instructions on replacing it?

 

Thanks

Franco

↧
Search

Can not print anymore, probably because cryptation certificate is out of date

April 16, 2018, 10:57 am
$
0
0

I about 2 weeks ago I startet to get this error message (in norwegian, sorry, I do not know how to translate it):

Krypteringsakkreditiver er utløpt.

("er utløpt" means "is out of date".)

 

So I can not print anything anymore, anyone please any idea what to do?

 

↧
↧

HP CLJ M477FDN prints blank copies only when run through the ADF

April 16, 2018, 11:32 am
$
0
0

The printer has the most recent firmware, and had a scanner assembly replaced about 2 months ago. Printer is out of warranty.  It copies off the glass just fine and prints from the pc without any problems.

↧

Error Code when turning off and my printer wont print

April 16, 2018, 11:46 am
$
0
0

I got the error message OXB843BCBO. My printer will not print, and yesterday after scanning one document it decided to not work after that. Very frustrating. When  I tried to print today I still would not work, states printer is busy. I tried to turn off my printer and then recieved that message. 

↧

printing on cardstock

April 16, 2018, 12:17 pm
$
0
0

I am attempting to print my wedding invites on cardstock. I have successfully done it previously however I am now attemtping again and keep getting a paperjam. I have changed the type to extra heavy like I had previously....???

↧
↧

Laserjet 9000 print distorted - shorter when using legal size paper

April 16, 2018, 2:05 pm
$
0
0

I have 2 laserjet 9000 printers and I notice when I print the exact same file on legal size paper (so it prints top to bottom) one of them is shorter by at about one line height. Not sure it's related but this printer also pulls the legal size paper crooked - much more on tray 3 barely noticeable on tray 2. The "short" print problem gets better when I install a new transfer roller but it seems I have to replace the roller and / or the transfer roller assembly at about 50% of expected life to reduce the print quality problem. I have put in at least 2 maintenance kits and several pick up rollers.

 

On letter size paper occasionally the print gets distorted but only a few sheets out of 1000 so it is hard to trouble shoot using letter size paper.

 

It seems that the paper is not feeding at the proper speed through the transfer roller area but not slow enough to get any jam errors.

 

Any clues as to what could be causing the problems? This getting into replacing parts that are higher in cost and some major time to replace so if I can get it narrowed done some that would be a big help.

 

Thanks for any help you can provide

Ron Gregor

↧

I have a Hp color LASERJET PRO MFP M177fw doesn’t ant to print over wifi

April 16, 2018, 4:31 pm
$
0
0
My problem is that the printer always has problem when printing over WiFi. Sometimes it would work
Most of the time it doesn’t. I unplugged it, put in the WiFi password again. Same no outcome
↧

Problem with Printer

April 16, 2018, 4:49 pm
$
0
0

My HP LaserJet P2015d printer is making grinding noise whenever I turned it on and it is not picking up papaers from the paper tray

↧
Search

New Windows 10 PC can't see my LaserJet 1020

April 16, 2018, 7:21 pm
$
0
0

I followed directions to find a built-in driver; my LaserJet 1020 could not be seen. I downloaded and ran the HP driver software; it still could not see the printer. I tried two different USB cables (which I know are good) and plugged into different USB ports. Nothing. Any suggestions? Thanks.

↧
↧

M477FNW will not stay in sleep mode

April 16, 2018, 9:14 pm
$
0
0

Just installed this printer.  No matter what I do, it will not stay in sleep mode.  I've changed the settings to sleep after 2 minutes, with no delay.  It goes into sleep mode, but wakes up about 10 seconds later.  Over and over and over again, all night.  Any help would be appreciated.

↧

Very bad service with HP Service Center. Warranty is useless. Not buying any HP products!

April 16, 2018, 10:56 pm
$
0
0

Though you have the right to ask for a technical person to attend the issues with the printer as it's under warranty, they will try their best to let you solve the issue yourself which is not acceptable.

 

After asking you to send too many reports and images, in the end you will be stuck with that problem until the warranty ends.

 

Very bad experience with HP Service especially this Khaled Dowidar. He closed the case without even resolving it. 

 

Will not buy any HP products again!

↧

Xpress SL-M2026 toner information

April 17, 2018, 12:08 am
$
0
0

Hy,

 

is there a way to check toner install date and number of printed pages on Xpress SL-M2026?

 

Thank you.

 

↧

M254nw driver issues (2008r2)

April 17, 2018, 2:02 am
$
0
0

When trying to install the drivers for this printer I am getting a message that the driver is not compatible with the OS.

any ideas on fixes?

 

cheers.

↧
↧

How do I get my HP 3055 printer hooked up in a network with windows 10?

April 17, 2018, 5:02 am
$
0
0

Good Morning Everyone.

After being deployed for 5 plus years. I/we left with windows 7 Premium and I return with windows 10 OS computers and have a problem getting our older and trusted Laserjet 3055 hooked back into a network configuration. When I search for the printer using the app with windows 10...the printer is not found. At this time, and a few hours of searching and trying software from HP, I have the printer hooked up using one computer and a USB cable. I would like to get the printer hooked up as a network printer again. Is this possible?

Thank you for your help

Stu

↧

HP LaserJet 1212nf keeps changing IP address from manual to automatic by itself

April 17, 2018, 6:23 am
$
0
0

HP LaserJet 1212nf keeps changing IP address from manual to automatic by itself. When it happens my Ultrasound which is conected by fixed IP address stops being able to print because printer is on automatic and it can not communicate.

Please any suggestions ? My friend told me to try to upgrade firmware, but it seems easy for windows, but nor easy for MAC.

↧
Search

HP LaserJet CP2025

April 17, 2018, 7:05 am
$
0
0

Company had hug power outage and now HP printer screen is blank even after rebooting printer. Printer lights are on but screen remains blank. Is there a way to resolve this issue?

↧

t2300 clicking sound

April 17, 2018, 8:45 am
$
0
0

I am having this problem as well.  Is there a solution?  HP LaserJet T2300.

↧
↧

Printed pages not printing correctly

April 17, 2018, 9:56 am
$
0
0

Hello,

 

When printing,  some pages dont fully display what was suppose to print. When using other printers the pages seem fine. Does it have to do with a memory issue of the printer?

 

I already have downloaded the firmware update provided on the HP support site but no luck.

 

Has anyone else experienced this? Appreciate any help.

 

Specs:

 

Windows 8.1 - 64-bit

 

↧

Printer is changing my IP address

April 17, 2018, 10:10 am
$
0
0

I'm attempting to set up a new printer on my office's network.  I have the IP address/Subnet Mask/Default gateway and the instructions to manually enter them.  I follow the instructions and the first issue I have is that there is no "save" button.

 

The second issue I have is that when I exit out of the menu where I have entered the appropriate numbers, the printer changes them to some random numbers.

 

How do I get the printer to save the numbers I have entered?  I've been dealing with this with my own IT people and they can't figure it out either.

↧

LASERJET PRO M203DW REFUSES TO SIMPLEX

April 17, 2018, 10:11 am
$
0
0

Regardless of what software package I am working in, this printer refuses to print on only one side of the paper. I have found two different places in the print driver to turn OFF duplexing, and have done so in both to no avail. Please help!

↧
Viewing all 56366 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>