Some PDF files just will not print on the laserjet.
Others (most) come out just fine colors and all.
The bad ones will just print as pages filled with large black patterns. Nothing that resembles what it looks like on screen.
When I try the same PDF:s on my photo printer (A3+ inkjet) they print OK.
I have a HP Color LaserJet CP5225 printer that keeps giving me a "59.F0 Turn Off then On" error message. I have obviously turned it off and then back on, but it never goes away. As per other posts I've seen, I understand it could be an issue with the ITB assembly. I have found more info on the error code but I'm not sure I understand it.
I have replaced the ITB, cleaned out the sensor area, and checked all connections. The only other thing that the official support manual recommends doing is:
3. Run the switch test in the sensor monitor mode to verify that the primary transfer roller disengagement switch is functioning correctly. If it is not functioning correctly, replace the primary transfer roller disengagement switch unit.
4. Run the primary transfer roller engagement and disengagement drive test in the actuator drive mode to verify that the primary transfer roller disengagement mechanism is functioning correctly. If it is not functioning correctly, replace the fuser drive unit.
I don't know how to perform either of these operations and I'm sure there are other troubleshooting tips someone could offer me. I appreciate the help and will answer any specific questions about the machine and what I've done so far.
Hi All,
I am looking for a printer that can print upto 150,000 pages per month and after analyzing i have found m506dn was suitable for my purpose. But the question here is ,
Can i print upto 350 gsm card in m506 printer?
If not can somebody tell me which printer i can choose with to print 150,000 pages per month with 350 GSM paper?
Thanks in advance.
Printer won't copy from feeder. It takes paper but doesn't copy. However, it will copy from the screen.
Similarly, it won't scan from the feeder. It takes the paper but doesn't scan. However, it will scan from the screen.
I have tried resetting the the default settings without any change. I have also unplugged and then reconnected the power cable, without any change.
Will apreciate any suggestions.
Stevezzz9
Just did a fresh install of Win 10 Pro 64-bit onto a brand new 446 GB SanDisk SSD (only 83 GB used).
I'm printing to an HP CP2025dn color laserjet, connected via USB, which worked fine before I switched to Win 10. (Was coming from - don't laugh - Win XP SP3. Had to switch to the new OS due to Adobe Creative Cloud not supporting it any more.)
Now when trying to print multiple copies from Adobe Illustrator CC, I can only print one copy at a time. It WILL print the number of sheets I request, but there's an insanely long pause between each printing of about 30 seconds. My printer doesn't have a hard drive but does have 96MB RAM installed - which has been more than enough to print graphics on my old XP OS. So I know it's not a RAM issue. (Most of the graphics I print are under 30MB anyway.)
I've been on tons of Google searches and everyone talks about disabling 'mopier mode', but that option does NOT show up; it's not that it's grayed out; it doesn't appear at all. I've been through every Device tab, every Printer Properties tab, and tried printing directly to the printer, which results in an error message.
Print settings under Advanced tab are: spool print docs, start printing immediately, print spooled docs first. The printer driver that automatically loaded is HP CP202X PCL6 Class.
I did not try installing a UPD (universal printer driver) because W10 automatically recognized my printer when I plugged it in. I didn't list the make of my machine because it was my brother-in-law's. He had a computer shop build it for him and it worked great for XP. Basic specs: Intel i5 CPU, 3.2 GHz, 4 GB RAM. Hard drive specs were mentioned above.
At my wit's end. Any suggestions?
Howdy! My HP LaserJet CP1525nw frequenty jams with the message "jam in tray 2". I poked around forums and it looks like I need rollers. Can someone provide a part(s) number that I need? Better yet, a link to the part(s) on amazon or ebay? Thank you!!!
-greg
Please assist in troubleshooting my printer. It will print from Word but not from Chrome.
This is what happens:
1. Sent file for printing
2. Printer starts up and says printing document
3. A few seconds later the attention light comes on and the screen says Hewlett Packard >> then in few seconds Hewlett Packard>>>>
4. Printer shuts down and green ready light and attention light flashes twice
5. Front USB port then flashes in green
One other clue - it showed error 79. So I have powered down and powered up, I printed diagnostic reports and noticed that Cyan is not printing. I pulled the cartridge out shook it and replaced. I printed service page and found no usable information.
I have a HP officejet 4620 Series and I have just changed the printer cartridges, and it still prints like there is no ink. I have used original HP cartrdiges. Can you please give me some suggestions why this is happening?
I normally don't have a problem when I change the cartridges.
Thanks
Carmel
My printer hp laserjet mfp m830 has 30.03.23 error messager. How can I fix this issue?
Anybody can reply using my email addredss: rulindanag@gmail.com
Thanks
Hi,
My prints all come out like this: https://bernieke.com/posted/print_problem.pdf
Can anyone tell me what the cause of this is? I'm guessing it might be a bad red toner, but considering what they cost I'd rather make sure before I order one...
Thanks,
Bernard
can i scan documents to my computer from p1102w
I just bought a HP LaserJet Pro MFP M130fw and I am trying to set the setting for two-sided printing. The default is one-sided printing and I haven't figured out to change it. Any help would be most appreciated. Thanks!
i havea ink system failure on my printer
On all printed pages, every 6th line is blurry. I am using HP ink cartridges. Any help would be appreciated.
Thanks!
ink cartridge exploded while removing the orange tab. there is ink everywhere. desk, carpet, clothes WEDDING RING!!!! WHY????
Проблема при печати фотографий на принтере M252н .Фотографии с фотоаппарата пытаюсь распечатать, lдолго очень долго думает а потом пишет ошибка 883 или недостаточно памяти. На черно-белом LJ 1020 тоже самое печатает быстро. Уменьшал фото пакетно - 60фогографий по 4шт. н а листе печатал минут 20!!!!!
My all in one is stuck with a spinning icon and message saying it is printing fax page 3. I have tried turning it off and unplugging it. When it is turned back on it prints the same 4 pages of a previous fax and then returns to the error state. The X on the printer will not clear it when pushed. I can clear the print queue from my computer but it only clears printed items not faxed items. Printer will not do any other functions (print, copy, etc).
Cannot print Word or Excel documents. Receive the followiing printed message:
PCL XL error
Subsystem: TEXT
Error: InternalError 0x50
Operator: BeginChar
Position: 33
Please help. I have some urgent documenting to print.
Thank you very much!
Tried to print a form from computer; printer would not print. Tried to print something just on the printer; got another blank page; what could be wrong??