Incorrect order and position (Top-Down & then Down-Top) printing

April 5, 2020, 5:21 am

The printer prints in an incorrect order and position. The page order is not right. It print the first paper with Top-Side- down and the next page came Down-side-Top. This will be very challenging when you want to print materials by flipping over, because it will print the first page top-down and in the back you got to turn it up-side down after flipping over. The printer works fine over my laptop, the problem occur when it came to my Desktop.

Regarding the page order it print page 3 first, then it could be page 9, then 1,5,2 ....

↧

Unable to Print from laptop

April 5, 2020, 6:55 am

≫ Next: Printer laser jet HP 1102w Password help

≪ Previous: Incorrect order and position (Top-Down & then Down-Top) printing

Hi there,

Having issues printing only from my laptop. Otherwise can print from my phone, my wife's laptop, and even remotely through my hpeprint.com email.

I have tried reinstalling software and the drivers and have been following the instructions on the forums with no luck.

Please help. Thanks!

↧

Printer laser jet HP 1102w Password help

April 5, 2020, 7:25 am

≫ Next: Dual Voltage LaserJet Pro MFP M29 w?

≪ Previous: Unable to Print from laptop

HELP please I am desperate. Hi everyone, I know this has already been asked but there has been many different solutions posted. I am a teacher that was thrown into remote learning. I needed a printer so I brought the one home from my classroom. I have an HP laser printer 1102w that was set up with a USB cord. ( no WiFi) We also were not given any users Manuels since it was purchased and set up through the school. I didn’t even know this had a WiFi connection or a scanner until I started looking here. My issue is when I try to print I get the error I need to login with the administrator password to continue printing. My school has been closed for three weeks now and all I want is to be able to print using the USB cord not the WiFi. Is there a quick fix so I can continue my online teaching without having to buy another printer ASAP? I’m nervous to do a factory reset not knowing what I am doing. Thank you to whoever can walk me through this. Stay healthy everyone

↧

Dual Voltage LaserJet Pro MFP M29 w?

April 5, 2020, 7:36 am

≫ Next: envy 7855 printer printing on it's own

≪ Previous: Printer laser jet HP 1102w Password help

Good Morning

I have just purchased a LaserJet Pro MFP M29w all in one printer from the US . (10A 125V ~) is written on the power cord . my question is does this mean that it will not operate on countries that use 220 v? if not can you please show me where i can purchase the same laserjet printer that have a dual voltage ? I have looked online in many suppliers and could not find one.

Thank you.

↧

envy 7855 printer printing on it's own

April 1, 2020, 7:42 am

≫ Next: Printlevel low but the percentage is 70%

≪ Previous: Dual Voltage LaserJet Pro MFP M29 w?

On my new HP Envy 7855 All in One printer, it is randomly printing pages with the following message:

GET / HTTP/1.1

Host: 192.168.1.8:9100

User-Agent: curl/7.59.0

Accept: */*

↧

Printlevel low but the percentage is 70%

April 5, 2020, 8:58 am

≫ Next: LASER PRINTER ERROR 9° 03

≪ Previous: envy 7855 printer printing on it's own

My printer is mentioning that the black toner is low but the percentage is 70%

It does result in the black not printing nicely deep black...

Is anyone familiar with this and knows how to solve this!

↧

LASER PRINTER ERROR 9° 03

April 5, 2020, 9:54 am

≫ Next: Start up/shut down procedures for HP Colour Laser Printer150nw

≪ Previous: Printlevel low but the percentage is 70%

I NEED TO OPEN AND CLOSE PAPER DRAWER TO PRINT

THANKS FOR HELP

↧

Start up/shut down procedures for HP Colour Laser Printer150nw

April 5, 2020, 10:27 am

≫ Next: HP OfficeJet 5258 does not always print PDF files. Only blank pagews are produced.

≪ Previous: LASER PRINTER ERROR 9° 03

I have a new HP Colour Laser Printer 150nw. The control panel is blank and the instructions supplied with the unit did not seem to include the basic start- up/stop/bluetooth link instructions. I have the reference guide, but this does not answer simple questions such as: How long do I press the power button to start the unit/how do I turn it off/what to do when the attention light flashes etc. I have tried to find a decent user's guid on the HP website, but all I get is the reference guide once again! Why on earth can't HP just provide a decent detailed guide with the machine on purchase?

↧

HP OfficeJet 5258 does not always print PDF files. Only blank pagews are produced.

April 5, 2020, 12:05 pm

≫ Next: Printing Envelopes

≪ Previous: Start up/shut down procedures for HP Colour Laser Printer150nw

LAtely, some PDF files come out blank when printed. No error messages, no issues with stored documents. Word documents are not always clear either. There's enough ink in both cartridges.

↧

Printing Envelopes

April 5, 2020, 12:38 pm

≫ Next: can't add laserjet pro 1606dn to windows 10

≪ Previous: HP OfficeJet 5258 does not always print PDF files. Only blank pagews are produced.

I am unable to print envelopes on my HP Laser Jet cm1415. It goes through the motions, sounds like it is trying to load the envelope and then keeps telling my there is a paper jam and there is not.

↧

can't add laserjet pro 1606dn to windows 10

April 5, 2020, 1:23 pm

≫ Next: Problems with HP 107w laserjet wireless printer

≪ Previous: Printing Envelopes

I am trying to add a laserjet 1606dn to some windows 10 computers using the installation software downloaded from https://support.hp.com/us-en/drivers/selfservice/hp-laserjet-pro-p1606-printer-series/4110408. It is not finding the printer on the network. I can ping the ip and visit the web interface for the printer.

↧

Problems with HP 107w laserjet wireless printer

April 5, 2020, 1:43 pm

≫ Next: I was not allowed to install my new LaserJet Pro unless I put it on WiFi--don't WANT it on WiFi.

≪ Previous: can't add laserjet pro 1606dn to windows 10

I have just purchase a HP107W and have been ripping my hair out since I purchased it...……...

I have connected the printer to my LAN via WPS and have confirmed this by doing the test print which shows it is connected. I have also typed the IP into the browser and this launches the admin page for the wireless printer so it is connected. The most recent drivers have been installed but HP Smart doesn't work as it cannot find the printer to add it.

The issue I am getting is whenever I go to a word document for example to print it says the printer is offline.... If I click print it says it connect communicate with the printer? ---- If I connect the printer to my laptop via USB during setup it sometimes finds it but it often doesn't. I've tried the HP print and scan doctor which can never find the printer to diagnose the issue..

The printer is powered on and the blue wifi indicator is solid blue

I've managed on very rare occasions to print a single page after which it returns to its uncontactable state... I have gone through the online virtual assist and have completed all of the suggestions even changing my wifi channel. I have two windows 10 laptops both of which I have installed the software on and it isn't working on either.

Have tried a power cycle of the printer and the router which hasn't made any difference. I have disabled firewalls and Anti virus periodically to see if these were the issue.

Any help would be great!!

↧

I was not allowed to install my new LaserJet Pro unless I put it on WiFi--don't WANT it on WiFi.

April 5, 2020, 7:19 pm

≫ Next: Network connection need Queue Name

≪ Previous: Problems with HP 107w laserjet wireless printer

HP would not allow me to install the printer unless I put it on the WiFi... but I don't want it on WiFi because other people will print to it. How can I get if off WiFi and just connected with USB?

↧

Network connection need Queue Name

April 5, 2020, 8:25 pm

≫ Next: LaserJet 3055 AIO garbled vertical streak for first several pages only

≪ Previous: I was not allowed to install my new LaserJet Pro unless I put it on WiFi--don't WANT it on WiFi.

Attempting to connect my HP LaserJet Pro MFP M148 printer to a Synology NAS on my home network

I am looking for the "Queue Name" for my HP LaserJet Pro MFP M148fdw printer. Which of the following 4 choices of protocols should I use for a connection to the printer? { LPR, IPP, Socket, BJNP}

↧

LaserJet 3055 AIO garbled vertical streak for first several pages only

April 5, 2020, 8:27 pm

≫ Next: stopped filter failed hp Laserjet CP1025nw With Catalina 10.15.4

≪ Previous: Network connection need Queue Name

LaserJet 3055 produces a garbled strip about 1/2 inch wide, 5 inches from left edge of paper. Everything else on the page looks fine. This error disappears after 4-5 pages have printed, presumably because some part has warmed up sufficiently. After the printer has cooled down, the streaks appear again.

I have replaced the toner cartridge, and wiped down the transfer roller to no avail.

Please let me know if there are any further inexpensive things to try. The printer is old enough that replacement is certainly a viable option. Thanks!

↧

stopped filter failed hp Laserjet CP1025nw With Catalina 10.15.4

April 5, 2020, 8:30 pm

≫ Next: HP LaserJet Pro MFP M428fdw admin password reset procedure

≪ Previous: LaserJet 3055 AIO garbled vertical streak for first several pages only

I am getting " stopped filter failed " error while printing. I tried to reset Printer and add back after restarting Mac/Printer does not help. Error comes for both USB connection as well as Wireless. Only i can print test page Hp utility software.

↧