Printer recently started printing blue streaks on any areas that had white print areas (color printing only).
These look like small blue smudges or streaks.
Printer firmware is up to date. I have tried calibration and cleaning as well as shaking all the cartridges.
All cartridges are HP OEM and are at the following levels: black 40%/cyan 70%/yellow 90%/magenta 10%
it only happens with blue ink on white background. I've checked the cyan cartridge visually, but don't see any problems with it.
how to get offline
Recently I revamped the internet in my house via Netgear to get the internet in the backyard office via the electric line. I don't know if that is related or not.
But when I print, it says "cleaning" in the middle, then after cleaning stops it beeps and says "misprint", and if I press OK, it continues and then does it again shortly thereaft3er. I need to go through this repeatedly before I can get everything printed. Is something wrong with the printer? Is there a way to fix this? Would buying a new printer helpl? (It is about 4 years old.) My warranty just expired 2 weeks ago. Should I call in anyway?
Thank you kind people.
On 1/8/2019 I installed a new Cyan print cartridge. Since then my printer does not print the blue color. How do I fix this?
Hi, all!
Please, help me.
HP LaserJet P2055dn. Error 49ERR3D911F6. What does it mean?
Thank You very much!
Artem
Trying to clean pick up rollers on HP color laserjet Pro M452dw
Our M607 LserJet makes a growling noise at startup and when it prints for just a few seconds. The sound is coming from the back top of the printer near the fuser. We have run component tests and cannot recreate the noise. We have replaced the pickup rollers with no improvement. Does anyone have a possible solutionshort of replacing the fuser?
I need to reset the password on this printer. It's my father's, and I wasn't the one to set up the printer. I can't access any of the settings without this unknown password. All the solutions on this message board relating to this issue were sent via private message, so that doesn't help me. I did try "admin" as a password, but that didn't work.
Hello,
I have recently replaced my M130a printer with a M130nw one to get rid of wires... but on wireless I could barely use the scanning option.
The printer have a reserved IP, the address is shown on the printer screen, if I continously ping that address all is perfect until I launch the scanning application.
I could some simes scan a page, other times a couple of pages but no more. It looses ping replies, and the scanning app reports connectivity error and suggest to "fix" with "HP Print and Scan Doctor" that could not repair.
The same problem is reported on my Windows 10 x64 PC and another PC with Windows 7 x64. Both computers can communicate between them and over the internet without any problem but not with the printer.
The printer have the latest firmware (20180510) and drivers installed on Win10/7 is 44.3.2667.
There is a way to make it work, or I should complete a RMA?
Kind regards,
Lucian
when I print on Officejet pro 8600 or Officejet Pro 8710, the printing is coming out two sided.
I went through all the suggestions, up to replace the Printer Heads. Is this common / worth it?
I can't print. I have tried 1 million times to print out documents from my computer but it does not working, it has worked perfect before and now it dose not work for some weird reason. I need help. Pleace, because these documents is very important.
Hello,
In our organization we set up a single physical printer with an extended paper drawer as two seperate printers defaulted to either tray 2 or tray 3 on our print server with different names. The is that there are preprinted forms in tray 2.
In order to minimze print jobs on the wrong paper, for the printer setup for tray 3, we wish to at the print server level go into device settings and change the status of tray 2 to "not available". When we attempt this we do not have the option to apply or save the changes.
Due to cost, space and other reasons it is not possible to break these apart into seperate physical printers.
Thank you for any suggestions.
can I replace a printer head on officejet pro 8600
Hello, according to the thread here: https://h30434.www3.hp.com/t5/LaserJet-Printing/Color-Laserjet-Pro-MFP-M177fw-will-not-leave-the-HP-amp/td-p/5737983 , the last step if nothing else works is to perform an NVRAM reset. I'm getting a Scanner Error 13. I've followed troubleshooting steps both in that thread and these others: https://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/MFP-M177fw-Scanner-Error-13/td-p/3658410 , https://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/HP-Color-LaserJet-Pro-MFP-M177fw-screen-frozen-on-hp-logo/td-p/4967522/page/3 ... with no luck. Would someone please send me those instructions?
My printer will not copy or print 2-sided documents. It will not allow me to copy more than one page at a time. Please help.
I cannot get the claim code to enable web connected services and ePrint. The code is embedded in the ePrint's email address but I can't find the address either. HP support guidance has been useless.
I'm trying to print on 110# coverstock. I've tried the two heaviest settings and although it prints almost every page is causing a jam leading me to believe this printer can't handle exactly what I purchased it for. If anyone has used this heavyweight cardstock, can you advise the correct Media type to choose?
How to reset Hp LASER JET MFP M 436dn.The error massage is end of life,replace with new toner catridge
Currently Mac OS 10.13.6. I have had a ppd for this printer rarely appear in all Adobe CC 2018-2019 programs. But never stays. Now I have no ppd for the printer AT ALL even though I have installed, uninstalled, reinstalled and trashed printer and preference plists and restarted soooo many times. HP Easy Start does not install a ppd. I accidentally installed Mac OS Mojave and it wreaked such havoc I had to uninstall. Had same issues. At one point tonight, I actually had the ppd show up but a message appeared that it did not match selected printer even though both were the same. Then it totally disappeared when I verified selected printer. No ppd was available. Anyone have any ideas? Apple said it’s not their prob it’s printer manufacturer issue. I’m out of ideas.
